2.  Duress Codes

Reports Duress Code when the EMERGENCY button is pressed and police are notified immediately

3.  Medical Code

Reports when MEDICAL button is pressed.  Control room will phone persons nominated by client, e.g. doctor, nurse, neighbour, relative, carer etc.

4.  Fire Code

Reports Fire Code when FIRE button is pressed or if Smoke Detectors and Heat Sensors are activated.

5.  Entry Under Duress Code

If someone forces you to turn off the alarm system, enter a secret code which turns off your system but sends a silent Duress Code to base.  Police are notified immediately.

6.  Low Battery Code

Reports when back up battery has dropped voltage or will not re-charge.  Manufacturer recommends backup battery be replaced every three years.

7.  AC Power Fail

Reports if the system is removed from power point or if the electricity is turned off at the meter box or if fuses are removed.     Without power the backup battery cannot re-charge.  Also protects contents of refrigerator and freezer.

8.  Automatic Test Code

Auto tests phone line and alarm system check daily.

9.  Tamper Code

Reports if outside Siren Cover is tampered with or any of the cables are cut.

Reports if total power is lost to the alarm system and internal clock needs to be re-set.

Domestic Monitoring | Commercial Monitoring